ANIMAL WEIGHING PROCEDURE
• With the platform empty the display will show zero weight.
containers or blankets onto the platform and press the [
zero the display. The scale may go into the animal (dynamic) weighing
procedure when the items are placed on the scale but will return to
showing zero when the [
• Place the animal or sample to be weighed on the platform.
• The display will show the Animal/Dynamic weighing symbol
stable weight is determined. The time it takes for the stable value will
depend upon the setting of the filter parameter in the first step.
• When a stable reading is found, the display will show this value, and the
display will be locked until the [
show the "Hold" symbol while the display is locked.
• To weigh a second subject press the [
the display, and place the next animal on the scale. The scale will detect
the new weight and hold it as before.
• The scale will remain in the animal weighing mode until the [Unit/ ] key
is pressed. Then it will return to normal weighing.
0/T
] key is pressed.
0/T
] key is pressed. The display will
0/T
Page 17
0/T
] key if necessary to zero
Place
] key to
while a