Brake Pedal Lock; Parking Brake Control; Front-Wheel Drive - Shibaura ST450 Operator's Manual

Brake Pedal Lock

The brake pedal lock (1) in Figure 2-26, is used to
secure the brake pedals together. Lock the
pedals together, as shown in the illustration,
whenever the tractor is operated at high speeds
or when the tractor is used on the highway.

PARKING BRAKE CONTROL

The parking brake (2) in Figure 2-27, is used for
locking the brake systems in the applied position.
The parking brake should be applied whenever
the tractor is parked.
To apply the parking brake, pull up the lever.
To release the parking brake, down the lever with
pushing the release button.

FRONT-WHEEL DRIVE

The front-wheel drive is controlled by a lever (3)
in Figure 2-28, located on the left side under the
seat.
To engage front-wheel drive, pull the lever fully
upwards. To disengage front-wheel drive, push
the lever fully downward.
IMPORTANT: Use front-wheel
additional traction is required while operating on
loose soil, in wet, slippery conditions, or on
slopes. For normal operation on firm soil, level
hard surfaces, or when roading the unit at high
speeds, disengage the front-wheel drive to
maximize tire and driveline life and to economize
on fuel.
SECTION 2 – OPERATION
drive when
2-14
2
3
1
Figure 2-26
Release button
Figure 2-27
Figure 2-28