Shibaura ST450 Operator's Manual page 102

SECTION 3 – LUBRICATION AND MAINTENANCE
FRONT AXLE PIVOT
NOTE: The center housing pivot points (1) in
Figure 3-56 (front side) and (2) in Figure 3-57
(rear side) should be greased after every 50
hours of operation under normal conditions.
Under extremely dirty conditions, lubrication
should be carried out more frequently than every
50 hours. Use a good quality, multipurpose,
lithium-base grease.
1
Figure 3-56
2
Figure 3-57
3-32