Brake Lights; Horn; Electrical Socket For Trailer - Shibaura ST450 Operator's Manual

Brake Lights

The brake lights (1) in Figure 2-20, are activated
when the brake pedals are depressed, with the
key switch in any position. The brake lights
illuminating, warns anyone following the tractor,
the brakes are being applied and the tractor
ground speed is being reduced.

Horn

To activate the horn, push the rocker switch (2) in
Figure 2-21. Horn can be activated with the key
switch in any position.

ELECTRICAL SOCKET for Trailer

A standard seven pin socket (3) in Figure 2-22, is
provided mounted on the left side of the tractor at
the rear. With reference to the picture inset, the
socket connections (as viewed from the rear of
the tractor) are as follows;
Pin No. Wire Color
L Green/Red
31 Black
R Green/White
58R Red
54 Green/Orange
58L Red/Black
SECTION 2 – OPERATION
Circuit
L.H. Turn Signal
Not Used
Earth (Ground)
R.H. Turn Signal
R.H. Tail lights
Brake Lights
L.H. Tail lights
2-12
1
2
3
Figure 2-20
Figure 2-21
Figure 2-22