Delivery Report - Shibaura ST450 Operator's Manual

INOPERATIVE SERVICE CHECKS
1. _____ Tire Pressure – 2-38
2. _____ Air Cleaner
Connections – 3-11 ~ 3-13
3. _____ Radiator Coolant Level – 3-16, 3-17
4. _____ Fan Belt Tension – 3-18
5. _____ Battery Cleanliness, Vent Openings,
Electrolyte Level, & Charge – 3-20
6. _____ Engine Oil Level – 3-6
7. _____ Transmission & Rear Axle Oil Level –
3-14
8. _____ Front Axle & Final Reduction Gear Case
Oil Level (FWD) – 3-30
9. _____ Hydraulic
Adjustment – 2-30
10. ____ Top Link (present) – 2-23
11. ____ Brake Adjustment & Pedal Equalization
– 3-29
12. ____ Rear Wheel Bolt Torque – 175 N·m -
3-27
13. ____ Front Wheel Bolt Torque – 175 N·m -
3-27
14. ____ Front Wheel Toe-in – 3-28
15. ____ Fuel Level – 3-4
16. ____ Seat Functions – 2-1
SAFETY ITEMS CHECKS
1. _____ ROPS Installed – 2-2
2. _____ Seat Belts Installed – 2-1
3. _____ ROPS Bolt Torque – 74.5 N·m – 3-19
Tractor Serial Number ____________________________ Delivery Date _______________________
Owner's Name________________________ Address _____________________________________
Dealer's Name________________________ Address _____________________________________
Dealer representative signature
I have been instructed in the operation, maintenance and safety features of this machine as detailed in
the operator's manual.
Owner's signature
SECTION 4 – SPECIFICATIONS

DELIVERY REPORT

CHECK AND ADJUST AS REQUIRED Tractor ST450
Element &
Lift Control Drop
4. _____ PTO Shield Installed – 2-19
Hose 5. _____ Safety Decals and Instruction
Decals Installed – 1-13 ~ 1-21
6. _____ Neutral Start Switches Operation – 2-7,
7. _____ Parking Brake & Operation – 2-14
8. _____ Flashing Lights/Tail Lights/Brake Lights
Operation – 2-11, 2-12
9. _____ Operator's Manual #300813440
10. ____ Horn Operation – 2-12
OPERATIVE SERVICE CHECKS
All operating checks are to be performed with
tractor at normal operating temperature.
Rate
1. _____ Lights
Operation, & Fuel Shut Down with Key
Switch OFF – 2-4, 2-5, 2-8, 2-10
2. _____ Fluid & Oil Leaks
3. _____ Maximum No-load Speed & Idle Speed
Adjustments – 4-1
4. _____ PTO Engagement & Disengagement
PTO Lever and Switches. – 2-18, 2-19
5. Hydraulic System:
_____ Selector Lever for Position Control
– 2-25
_____ Drop Rate Operation – 2-30
6. _____ FWD-Drive Lever Operation
– 2-14
7. Operation of HST – 2-15, 2-16
4-13
OWNER COPY
& Instruments for
Date
Date
Proper