Technical Specifications; Troubleshooting - Russound XStream X5 Installation Manual

Technical Specifications

Specifications
Specification Type* Specification Text
Shipping Dimensions
13.75" x 13.75" x 4" (350mm x 350mm x 102mm)
Product Dimensions 10.625"x 9.5"x 2.375" (290mm x 240mm x 60mm)
Shipping Weight 8.0lbs. (3.63kg)
Product Weight 7.0lbs. (3.14kg)
Audio Source Inputs (2) Digital inputs, Coaxial or Optical (TOSLINK)
(1) Bluetooth
(1) Internal Streamer
Communication Ports (1) Rear- 1 USB 2.0/1.1
(1) Ethernet RJ-45, 10/100 Base T
(1) Keypad RJ-45 T568A standard
(1) Bluetooth RJ-45 T568A standard
Frequency Response 20Hz-20kHz +/- 1 dB at 1W output into 8 ohms
Audio File Types MP3, WAV, AAC, AAC+, Real Audio
Max. Audio Sampling
Rate 192kHz
Fuse Rating 100-120V/T5.0A 250V US and Canada
220-240V/T3.15A 250V Europe
IR Outputs (1) 1/8" mono jack, tip positive, common
Keypad Outputs (1) RJ-45 T568A standard
Power Consumption 11W 100-240VAC 50/60Hz
Power Supply 100-240VAC 50/60Hz
Ethernet 10/100 Base T
Wi-Fi 802.11 b/g
Signal to Noise Ratio
93 dB unweighted, 96 dB A-weighted
Audio Connection(s) (1) Detachable, 4 pole color coded speaker connector
(1) Subwoofer connection, single RCA jack
(1) L&R line audio output (fixed or variable).
Total Harmonic
Distortion <0.4%, 50W output into 8 ohms 20Hz-20kHz
Trigger Output(s) (1) 12VDC 100mA
Watts per channel 50WRMS x 2

Troubleshooting

• Make sure the power switch is in the On position. The power switch is in the rear panel of
the product.
• Follow the quick guide instruction sheet to initialize the XStream™ X5 in each room. Refer the LED
Diagnostic guide for more information.
• When the controller and the keypads are powered ON all the corresponding LEDs on the face of
the controller will be green. Improper connection may cause one or more LEDs not to be lit. Check
all connections. See LED diagnostic guide (next) for additional information.
• Cycle power by pressing the power switch, waiting 10 seconds, and then pressing the power
switch again.
• Check connections from the keypads and speakers to the controller.
If the keypad doesn't respond to commands ensure the OS update jumper on the rear of the
keypad is in the RUN position.
64