Zone 12VDC Trigger Outputs
There is one 12VDC trigger on the back of the XStream™ X5. The 3.5mm jack provides 12VDC 100mA
when the X5 is turned on and is disengaged when the zone is turned off. The trigger can be used to
engage any 12VDC trigger device or component that does not exceed 100mA such as a subwoofer
or another amplifier. The connection for the trigger output is made using a two-conductor cable with
3.5mm male mono plug at each end. The tip is positive (+) and sleeve is negative (-).
RCA Cable
Set the Line Output to Variable in the SCS menu.
Subwoofer
RCA Cable
12V Trigger Cable
60