Russound XStream X5 Installation Manual page 36

Russound User Interfaces
Home Menu - Sleep Timer
You can set the timer so the zone turns off in one of the following increments: 15, 30, 45,
or 60 minutes.
Home Menu - Settings
Audio - From the home screen, scroll to and select "settings, " and choose "audio settings. " You'll see
items to adjust, such as bass, treble and balance. Each selection has its own screen and shows levels
for real-time adjustments.
Clock
Set time - From the clock menu, select "Set Time. " Press the +/- buttons to move through numbers.
Press the |< or >| buttons to move the cursor and press OK to save.
Set date - From the clock menu, select "Set Date. " The date format is month/day/year. Press the +/-
buttons to move through numbers. Press the |< or >| buttons to move the cursor, and press
OK to save.
Clock format - From the home menu, select "Settings, " then "Clock. " Choose "Clock Format, " and select
12 hour (AM/PM) or 24 hour (1200) format.
Display - Set the contrast and brightness for the keypad display. Use the buttons (as shown) to move
the cursor to the desired level.
AM/FM Sleep Timer 9:30 PM
After 15 minutes
After 30 minutes
After 45 minutes
After 60 minutes
Cancel
Installer Options
IR enable/disable - The default is Enabled. If an external IR receiver is used, the keypad IR receiver
should be disabled. From the main menu, select "Settings, " then "Installation, " then IR Enable/Disable.
Select "disable" and exit back to the menu.
Diagnostics - The MDK-C6 provides firmware version information for Controller 1 and the keypad.
Network information such as Controller IP and MAC address are also provided.
Adjusting display contrast and brightness
36