Russound Interfaces; Ts3 Touchscreen - Russound XStream X5 Installation Manual

Russound User Interfaces

TS3 Touchscreen

The TS3 touchscreen is a full-featured color touchscreen that provides a powerful user interface for
Russound's C-Series and XStream X5 multiroom audio systems. The user can easily access, control
and enjoy music from anywhere in the home. Housed in an attractive bezel, the TS3 features beauti-
fully rendered screens and elegantly simple displays.
The TS3 offers touch-sensitive screen templates for defined source controls, with audible feedback
and a detailed display of source functions. It also features responsive hard buttons for most-often
used commands and a front IR receiver that can be disabled.
The TS3 is designed for use with C-Series controllers, XStream X5 and works with Russound sources.
The touchscreen displays valuable information such as Channel, Artist, Song Title, Genre and more,
all in real time. It supports custom names for presets, banks, themes and favorites for a truly personal
touch. The TS3 makes a great addition to an installed Russound system, as it can be installed into an
existing double-gang junction box and built into your home.
Most of the controller, zone audio and source setup functions are performed through SCS program-
ming software; however, a few steps are completed through the TS3 menus, such as setting alarms,
setting time and date, keypad brightness, adjusting room audio properties and setting the associat-
ed zone.
Now Playing Screen
The main screen is the starting point for using the TS3. The touchscreen displays the currently select-
ed source info.
Source Screens
Each source device is controlled through screens designed specifically for that source. Control
choices and content menus are located on the source screens, and additional functions may be
available through the hard buttons.
Options Screens
(top right corner of screen)
Zone preferences can be set through the options screens. These include sound control, features
(DND), time and date, alarm, screen setup (brightness and installer setup).
Hard Buttons
There are eight hard buttons that frame the touchscreen, each of which perform a basic function.
IR Receiver
The IR receiver is hidden behind a tinted window at the top of the bezel and transmits IR signals
from a remote control back to the controller in order to control the sources. This can be disabled
if desired.
Showing Source Selection Screen
IR Receiver - Receives IR signals from remote controls.
Can be disabled if desired.
Volume - Turn room
volume up or down
Pause - Pause/mute
for selected source
Turns
Power -
keypad and
zone audio off
or on. Press and
hold to turn off/
on audio on all
Touchscreen - Full color resistive touchscreen with
enabled X5s on
multi-sound feedback. Screen can be programmed
the network.
to go blank after a period of inactivity. Touching the
screen anywhere reactivates it.
TS3 Front Panel
Plus/Minus - Adjust
setting for selected
source
Next/Back - Go to
next or previous
selection
33