Symbol Definitions - ENHANCED VISION Merlin Basic User Manual

Hide thumbs Also See for Merlin Basic:

Table of Contents

Caring for Merlin BASIC

• Always turn the power OFF for the Merlin BASIC and the monitor

when the system is not in use.

• At least once per week, clean the Merlin BASIC with a soft dry

cloth or an electrostatic dusting wipe. DO NOT use liquid cleaners on

its plastic surfaces. No additional methods of sterilization or cleaning

are recommended or required.

Susceptibility to interference:

There may be temporary degradation of the image when the

Merlin BASIC is subjected to a strong radio frequency field,

electrostatic discharge or transient electrical noise. An electrostatic

discharge (caused by static electricity) may cause the screen to go

black. If this happens, switch the unit off and on again.

Compliance Warnings:

• Electromagnetic compatibility: The use of accessories and cables

other than those specified by Enhanced Vision may result in

increased emissions or decreased immunity.

• Placement of equipment: The Merlin BASIC should not be used

adjacent to or stacked on top of other equipment.

Symbol Definitions

Type B - The level of protection of applied parts particularly

regarding allowable leakage current.

Class II - The product is not earthed (grounded) and relies on

double/reinforced insulation for protection against electric shock.

WEEE- Waste of Electronic and Electrical equipment

Safety and Care

Table of Contents

Do you have a question about the Merlin Basic and is the answer not in the manual?