Casio MZ-X500 User Manual page 9

Editing a Tone (User Tones)
Display Text
Stretch Tune
Filter
Cutoff
Resonance
Velocity Sense
Envelope
Envelope Depth Envelope depth. Specifies how the envelope is applied.
Attack Level
Decay Time
Decay Level
Amp
Volume
Velocity Sense
Envelope
LFO
Pitch Wave
FilterAmpWave
Pitch Rate
FilterAmpRate
Pitch Depth
Filter Depth
Amp Depth
Pitch Delay
Filter Delay
Amp Delay
EN-8
Stretch tuning. Sharpens high notes and flattens low notes to achieve
characteristic piano stretch tuning. Turn off this setting to play with
normal (non-stretch) tuning.
Filter. This is a group of editable parameters associated with filters
(tones).
• With this group, the vertical (Level) axis in the pitch envelope diagram
corresponds to how the filter is applied.
Cutoff frequency. Specifies the filter cutoff frequency.
Resonance. Specifies the resonance of the tone in the vicinity of the cutoff
frequency.
Velocity sense. Specifies the degree of change in the filter in accordance
with change in keyboard playing touch.
• For details about the parameters below, see "Pitch Envelope".
Initial Level, Attack Time, Release Time, Release Level
Attack level. Target level reached immediately after note on.
Decay time. Time it takes for the sound to reach the decay level from the
attack level.
Decay level. Level the sound is sustained as long as a key or pedal is
depressed.
Amp. This is a group of editable parameters associated with the amp
(volume).
Volume. Specifies the amp volume.
Velocity sense. Specifies the degree of change in volume in accordance
with change in keyboard playing touch.
• The vertical (Level) axis in the pitch envelope diagram corresponds to
the volume in the case of this group.
• For details about the parameters below, see "Pitch Envelope".
Initial Level, Attack Time, Release Time
• For details about the setting items below, see "Filter", above.
Attack Level, Decay Time, Decay Level
Low Frequency Oscillator. This is a group of editable LFO parameters
applied to pitch, filter, and amp.
Wave type. Specifies one of the following wave types to be used for LFO.
FilterAmpWave is shared by filter and amp.
Sin
(sine wave)
Tri
(triangle wave)
Saw up
(sawtooth up
wave)
Saw down
(sawtooth down
wave)
Rate. LFO speed (frequency). FilterAmpRate is shared by filter and amp.
Depth. Specifies how LFO is applied.
Delay. Specifies the degree of delay in the timing for applying LFO.
Description
Puls 1:3
(square wave 1:3)
Puls 2:2
(square wave 2:2)
Puls 3:1
(square wave 3:1)
Settings
Off, Piano1, Piano2,
Piano3, Piano4, Piano5,
E.Piano1, E.Piano2
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
0 to 127
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63
0 to 127
–64 to 0 to +63
Refer to the cell to the left.
–64 to 0 to +63
–64 to 0 to +63
–64 to 0 to +63