Casio MZ-X500 User Manual page 77

Editing Events
To adjust the velocity value of a note event
1.
On the EVENT EDIT screen, touch "Setting".
2.
Touch "Note Modify Setting".
3.
Touch one of the items below and then use the 9 w/NO, q/YES buttons to change the setting.
• To change a setting value in increments of 10, hold down the 9 w/NO or q/YES button as you rotate the bp VALUE
dial.
Item
Velocity Modify Fix
(Fixed value)
Velocity Modify Rate
(Velocity rate)
Velocity Modify Offset
(Velocity offset)
4.
Touch bo EXIT to return to the EVENT EDIT screen.
5.
On the EVENT EDIT screen, select the event whose velocity you want to adjust.
• For information about how to select an event, see "To select an event for editing" (page EN-73) or "To select multiple
events" (page EN-73).
6.
Touch "Detail".
7.
Touch "Velocity Modify".
This adjusts the velocity value of the note event you selected in step 5.
EN-76
Description
Specifies a fixed value as the velocity value. Select "Off" for this
setting to adjust based on the current velocity value of each note
event.
These settings are enabled only when "Off" is selected for the
"Velocity Modify Fix" setting item. They change the velocity value of
each note event according to the mathematical expression shown
below.
(Current Velocity) × (Rate Setting) + (Offset Setting)
Setting
Off, 0 to 127
000% to 100% to 200%
–126 to 000 to +126