Casio MZ-X500 User Manual page 80

To insert a chord event
• Chord events can be input to the MIDI recorder
system track only.
• In the case of the MZ-X500, you can also input chord
event steps into a pad that is assigned a chord
progression.
1.
On the EVENT EDIT screen, touch "Setting".
2.
Touch "Step Rec Insert Type".
3.
Touch "Chord".
4.
Touch bo EXIT to return to the EVENT EDIT
screen.
5.
Input chords using the procedure under
"Directly Inputting Note Events (Step Input)"
(page EN-78).
To adjust input event parameters
1.
On the EVENT EDIT screen, touch "Setting".
2.
Touch one of the items below and then use
the 9 w/NO, q/YES buttons to change
the setting.
• To change a setting value in increments of 10, hold
down the 9 w/NO or q/YES button as you rotate
the bp VALUE dial.
Item Description
Step Rec Velocity Specifies the velocity
(Velocity) value of an input note
event or chord event.
Specifying "KeyOn"
inputs a velocity value in
accordance with applied
key pressure.
Step Rec Gate Specifies, as a percent
Time Rate value, the length that a
(Gate time rate) note is actually sounded
(gate length) for a note
event, based on a specified
note.
3.
Touch bo EXIT to return to the EVENT EDIT
screen.
Editing Events
Setting
KeyOn,
0 to 127
1% to 100%
EN-79