Casio MZ-X500 User Manual page 19

Editing a Tone (User Tones)
Editable Effect Parameters
These parameters configure effect settings of each tone.
■ Effect Editing Screen
Touching "Effect" on a tone editing screen (pages EN-6, 10, 11, and 13) displays a screen for advanced effect
settings.
Touch Controller
Display Name
Algorithm For selecting the DSP type and configuring parameter settings.
Parameters whose settings can be configured depend on the selected DSP
type.
X Param, Y Param Show parameters assigned to the X-axis and Y-axis. For information about
parameters that can be assigned, see "Editable DSP Parameters" below.
X: Parameter assigned to the X-axis
Y: Parameter assigned to the Y-axis
Touch controller The "X Param" and "Y Param" settings can be changed simultaneously by
touching the screen.
Reverb Send Specifies how reverb is applied to a tone.
Chorus Send Specifies how chorus is applied to a tone.
Delay Send Specifies how delay is applied to a tone.
EN-18
Description Settings
See "Editable DSP
Parameters" below.
–
0 to 127
0 to 127
0 to 127