Casio MZ-X500 User Manual page 20

Hide thumbs Also See for MZ-X500:
Table of Contents

Advertisement

■ Editable DSP Parameters
DSP type/Parameter
Through
Equalizer
EQ1 Frequency
EQ1 Gain
EQ2 Frequency (X)
EQ2 Gain (Y)
EQ3 Frequency
EQ3 Gain
Input Level
Wet Level
Dry Level
Compressor
Attack
Release
Depth (X)
Wet Level (Y)
Dry Level
Select this option if you do not want to apply a DSP effect. There
are no parameters that can be set while this option is selected.
This is a three-band equalizer.
Adjusts the center frequency of Equalizer 1.
Adjusts the gain of Equalizer 1.
The Gain value is not a dB value.
Adjusts the center frequency of Equalizer 2.
Adjusts the gain of Equalizer 2.
The Gain value is not a dB value.
Adjusts the center frequency of Equalizer 3.
Adjusts the gain of Equalizer 3.
The Gain value is not a dB value.
Adjusts the input level.
Adjusts the level of the effect sound.
Adjusts the level of the direct sound.
Compresses the input signal, which can have the effect of
suppressing level variation and can make it possible to sustain
dampened sounds longer.
Adjusts the attack amount of the input signal. A smaller value
causes prompt compressor operation, which suppresses the
attack of the input signal. A larger values delays compressor
operation, which causes the attack of the input signal to be output
as-is.
Adjusts the time from the point the input signal drops below a
certain level until the compression operation is stopped.
When an attack feeling is desired (no compression at the onset of
sound), set this parameter to as low a value as possible. To have
compression applied at all times, set a high value.
Adjusts compression of the audio signal.
Adjusts the level of the effect sound.
Output volume changes in accordance with the Depth setting
and the characteristics of the input tone.
Adjusts the level of the direct sound.
Description
Editing a Tone (User Tones)
Settings
100, 125, 160, 200, 250, 315,
400, 500, 630, 800, 1.0k,
1.3k, 1.6k, 2.0k, 2.5k, 3.2k,
4.0k, 5.0k, 6.3k, 8.0k [Hz]
–12 to 0 to +12
100, 125, 160, 200, 250, 315,
400, 500, 630, 800, 1.0k,
1.3k, 1.6k, 2.0k, 2.5k, 3.2k,
4.0k, 5.0k, 6.3k, 8.0k [Hz]
–12 to 0 to +12
100, 125, 160, 200, 250, 315,
400, 500, 630, 800, 1.0k,
1.3k, 1.6k, 2.0k, 2.5k, 3.2k,
4.0k, 5.0k, 6.3k, 8.0k [Hz]
–12 to 0 to +12
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
0 to 127
EN-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-x300

Table of Contents