Table of Contents
Advertisement
Deleting all call button assignments via floor-call button
If necessary, the assignments to the surface-
mounted home station video can also be deleted
via a connected floor-call button:
1. Control device: press the "Systemprogr." but-
ton for 3 s to start the programming mode.
2. Press the floor-call button of the home
station with the assignments to be deleted
for 12 s.
A short acknowledgement tone sounds after
3 s and 6 s. Continue to press the floor-call
button until a long acknowledgement tone
sounds.
All assignments of the surface-mounted home
station video are deleted.
3. Briefly press the "Systemprogr." button on
the control device to exit the programming
mode.
43
Advertisement
Table of Contents
