Table of Contents
Advertisement
Assigning surface-mounted home station video to a flush-mounted
home station
Assign
>
Internal call >
Internal call 1
S: 1:20
The so-called internal call function can be real-
ized with the surface-mounted home station
video. A voice connection between two home
stations can be established via the internal call.
To assign the surface-mounted home station
video to another home station, proceed as fol-
lows:
1. Control device: press the "Systemprogr." but-
ton for 3 s to start the programming mode.
2. Home station: press the "Menu" button to
open the Start-up menu.
3. Select the menu item "Assign" in the Start-up
menu of the home station.
4. Select the menu item "Internal call" in the
"Assign" menu.
5. Select the desired internal call (1-10) and
confirm it with OK.
The surface-mounted home station video
outputs a long acknowledgement tone.
At the same time, the counter "S" of the
temporarily stored internal calls is increased by
1.
6. Press the button
3 s until a brief acknowledgement tone is
heard.
A long acknowledgement tone indicates
successful assignment.
Three short acknowledgement tones indicate
faulty assignment. The memory of the home
station (flush-mounted home station max. 10,
surface-mounted home stations max. 15 call
buttons) may already be occupied.
7. Briefly press the "Systemprogr." button on
the control device to exit the programming
mode.
on the home station for
39
Advertisement
Table of Contents
