Related Manuals for Gira 1279 series
Summary of Contents for Gira 1279 series
- Page 1 Installation and Operating Instructions Surface-mounted home station video 1279 ..
-
Page 2: Table Of Contents
Contents Device description ..........3 Operation .............. 4 Normal conversation mode........6 Switching functions ..........10 Structure of menu interface ........ 11 User menu ............12 Start-up menu ............. 19 Installation............26 Connection............27 Removal .............. 28 Start-up ............... 29 Assigning a door station to surface-mounted home station video .... -
Page 3: Device Description
Device description The surface-mounted home station video from the Gira telecommunication system is a completely preassembled unit with a 2" TFT colour display and a convenient hands-free speech function. The surface-mounted home station video is operated with capacitive operating buttons. The system settings and operation are supported with an on-screen display in 21 selectable languages. -
Page 4: Operation
Operation The surface-mounted home station video is oper- ated with capacitive operating buttons. All that is needed for operation is to lightly touch the sym- bols. Successful actuation of the buttons is sig- nalled by an acknowledgement tone, which can be switched off if desired. - Page 5 OK confirms the menu item selected in the display. Selection of the menu items or settings in the display. If no menu is active, the voice volume (see Page 7) and the ringing tone volume (see Page 7) are set with Directly switches a switching actuator (see Page 10).
-
Page 6: Normal Conversation Mode
Normal conversation mode Accepting a call ✓ When a call is received, flashes for two minutes. 1. Press to begin intercom conversation with the person at the calling station. ✓ During the intercom conversation, lights up. Maximum conversation time The maximum conversation time is 2 minutes. When this time expires, the conversation is automatically ended. - Page 7 Enforcement function If the background noises at the door station are so loud that automatic switching of the speech direc- tion is not guaranteed, the enforcement function can be used: 1. Press and hold while speaking. While the button is being pressed, it is only possible to speak from the flush-mounted home station video to the door station.
- Page 8 Deactivating/activating ringing tone Only deactivate the ringing tone if necessary Only deactivate the ringing tone in special cases. Otherwise, your run the risk of not hearing the ringing in an emergency, for example. 1. Press to deactivate the ringing tone. ✓...
- Page 9 Switching on camera image With the display of the home station and the related colour camera can be specifically switched on/off: 1. To switch on, briefly press ✓ If several colour cameras are present, the last active camera is switched on. ✓...
-
Page 10: Switching Functions
Switching functions Opening door 1. The door opener is operated with ✓ If several doors are present, the door opener of the door station from which the door call was made is operated within 2 minutes. It switches to the main door 2 minutes after the start of the call or 30 seconds after the door call is ended. -
Page 11: Structure Of Menu Interface
Structure of menu interface 1. Briefly press Menu to open the menu. Menu Internal call > Switching > Rng. tone melody > Brightness > Back 1 Menu title The active menu item is shown here. 2 Selection symbol The selection symbol indicates which menu item is selected. -
Page 12: User Menu
User menu 1. Briefly press Menu to open the User menu. Menu Internal call > Operation without Switching > additional power supply Rng. tone melody > Brightness > If a conversation is in progress between other users of the door communication system, then the menu Back cannot be opened on a surface-mounted home sta- tion video without an additional power supply. - Page 13 Switching Switching In the "Switching" menu assigned switching Switch. action 1 actions can be triggered. With the desired Switch. action 2 switching action is selected and triggered with OK Switch. action 3 or Menu. Switch. action 4 "Executed" appears briefly in the status line to Back confirm the switching action.
- Page 14 Assigning ringing tone melody Assign melody The surface-mounted home station video offers Melody 1 five ringing tone melodies, which can be individu- Melody 2 ally assigned to the call buttons of the door sta- Melody 3 Melody 4 tion, the internal call buttons of other home sta- tions or the floor call button.
- Page 15 Brightness - Contrast - Colour Selecting camera beforehand The colour camera must be selected before one of the menu items "Brightness", "Contrast" or "Colour" is marked. If no camera has been selected, the cameras available in the system are listed for selection. The respective parameters can be selected and set Brightness in the menus "Brightness", "Contrast"...
- Page 16 Switch-on time Switch-on time Factory setting: 30 seconds The switch-on time specifies the amount of time after which the display of the home station auto- 60 seconds matically switches off after manually switching on the camera pictures. The switch-on time is Back selected within the range from 20 seconds to 120 seconds with...
- Page 17 Options - Button tones The button tones of the home stations can be switched on/off here. Options - Automatic door opener The automatic door opener is used, for example, in doctor's offices. If the automatic door opener is active, the door opener is automatically actuated approx.
- Page 18 Options - Automatic call acceptance When an incoming internal call is received from another home station, the call is automatically accepted after 1 second. Note This function can only be ensured if only one home station with automatic call acceptance is called per internal call.
-
Page 19: Start-Up Menu
Start-up menu To open the Start-up menu: Menu 1. Press the programming button on the control Basic setting > device for 3 seconds to start the programming Frequency > mode. Lighting > Assign > ✓ flashes on the home station. If the home station has already been assigned Back call buttons,... - Page 20 Basic setting - Resistor Factory setting: activated The terminating resistor of the flush-mounted home station video is activated/deactivated here. This setting is dependent on the topology. More detailed information on this is available in the system description included with the video control device.
- Page 21 Frequency Selecting camera beforehand Before the menu item "Frequency" is selected, a colour camera must be selected. If no camera has been selected, the cameras available in the sys- tem are listed for selection. The optimum frequency of the video signal of the Frequency currently active transfer path is set for fine-tuning of the video signal between the camera and the...
- Page 22 Lighting Lighting Factory setting: activated Camera 1 Camera 2 The behaviour of the field of view illumination of Camera 3 the colour camera is activated or deactivated here. The desired camera is selected with confirmed with OK. Back A camera with an activated field of view illumination is marked with "...
- Page 23 Assign Assign In the "Assign" menu the home station is assigned Teach-in call components from the door communication sys- Internal call > tem (e.g. door stations, home stations and switch- ing actuators). R: 3.24 S: 2.20 The exact work procedures for assigning compo- Back nents from the door communication system are described in detail from Page 30.
- Page 24 Factory setting Factory setting The settings of the home station are reset to the Disp. parameters factory settings here. Delete cameras Del call asgnmnt A differentiation is made between: Delivered state Display parameters: Here the values of the menu items Basic setting, Language, Brightness, Con- Back trast, Colour and Switch-on time are reset to the...
- Page 25 Version Version Information on the version and the current soft- E904AF ware revision of the home station are shown here. FW 0100-0104-0139 HW 030104-0403 Back Additional menu items The following menu items are also available in the User menu and are described in the front section of these instructions: •...
-
Page 26: Installation
Installation Important Installation and mounting of electrical devices may only be carried out by a qualified electrician. The surface-mounted home station video can either • be mounted on a flush-mounted or hollow-wall box (only with cover frame) or • directly on the wall or on a wall lighting connec- tion box (with or without a cover frame). -
Page 27: Connection
Wall mounting 1. Strip the supply cable. 2. Mark the drilling holes. Specify the mounting location so that the mounting plate is located centrally over the cable outlet. 3. Drill the two mounting holes and insert the dowels. 4. Attach mounting plate with the cover frame to the wall with two screws. -
Page 28: Removal
Removal To remove the home station, carefully press the lower snap clip vertically upward with a screw- driver and remove the upper housing section of the home station. -
Page 29: Start-Up
Start-up of the door communication system is described in the system manual included with the control device (download the system manual at www.download.gira.de). The most important start-up procedures of the surface-mounted home station video are explained on the following pages. -
Page 30: Surface-Mounted Home Station Video
Assigning a door station to the surface-mounted home station video A door station call button is assigned to the sur- face-mounted home station video as follows: 1. Press the "Systemprogr." button on the control device for 3 sec. to start the programming mode. -
Page 31: Assigning Surface-Mounted Home Station Video To A Flush-Mounted Home Station
Assigning surface-mounted home station video to a flush-mounted home station The so-called internal call function can be realized with the surface-mounted home station video. A voice connection between two home stations can be established via the internal call. To assign the surface-mounted home station video to another home station, proceed as follows: 1. -
Page 32: Assigning A Flush-Mounted Home Station To Surface-Mounted Home Station Video
Assigning a flush-mounted home station to surface-mounted home station video A voice connection between two home stations can be established via the internal call. To assign a flush-mounted home station call but- ton to the surface-mounted home station video, please proceed as follows: 1. -
Page 33: Assigning A Switching Actuator To Surface-Mounted Home Station Video
Assigning a switching actuator to the surface-mounted home station video 1. Press the "Systemprogr." button on the control device for 3 sec. to start the programming mode. ✓ The LED of the last set operating mode flashes at the switching actuator. 2. -
Page 34: Assigning Surface-Mounted Home Station Video Via Floor-Call Button
Assigning surface-mounted home station video via floor-call button If you cannot access the flat during start-up, you can also assign the surface-mounted home station video via a connected floor-call button: 1. Press the "Systemprogr." button on the control device for 3 sec. to start the programming mode. -
Page 35: Deleting All Call Button Assignments Via Floor-Call Button
Deleting all call button assignments via floor-call button If necessary, the assignments to the surface- mounted home station video can also be deleted via a connected floor-call button: 1. Press the "Systemprogr." button on the control device for 3 sec. to start the programming mode. -
Page 36: What To Do If
What to do if... flash clockwise like a running light? This error message indicates that the additional power supply on the ZV terminal has failed. In this case the home station is no longer functional, with the exception of the door opener function. The additional power supply and the supply cable must be checked by a qualified electrician. -
Page 37: Notes On Care
Notes on care Cleaning To clean the surface-mounted home station video, wipe it off with a damp cloth (do not use cleaners containing solvents) or an antistatic cloth. Never use a dry cloth, as there is danger of static charging in this case. A button is accidentally pressed during cleaning When wiping off the surface-mounted home sta-... -
Page 38: Technical Data
Technical data Power supply: 26 V DC ± 2 V (bus voltage) Connections: 2 screw terminals for 2-wire bus 2 screw terminals Floor-call button 2 screw terminals Additional power supply Dimensions: W x H x D 55 x 127 x 21 mm Temperature range: 0 ºC to +50 ºC... -
Page 39: Warranty
The warranty is provided in accordance with stat- utory requirements via the specialist trade. Please submit or send faulty devices postage paid together with an error description to your respon- sible salesperson (specialist trade/installation company/electrical specialist trade). They will forward the devices to the Gira Service Center. - Page 40 Gira Giersiepen GmbH & Co. KG Elektro-Installations- Systeme Postfach 1220 42461 Radevormwald Deutschland Tel +49 (0) 21 95 / 602 - 0 Fax +49 (0) 21 95 / 602 - 191 www.gira.de info@gira.de...