Table of Contents
Advertisement
Assigning a switching actuator to the surface-mounted home station
video
Assign
>
Switch. action >
Switch. action 1
1. Control device: press the "Systemprogr." but-
ton for 3 s to start the programming mode.
The LED of the last set operating mode flashes
at the switching actuator.
2. Press the "Funktion" button on the switching
actuator several times until the LED of the
desired operating mode flashes.
3. Press the "Progr." button on the switching
actuator for 3 s until the LED next to the but-
ton flashes.
4. Press the "Menu" button on the home station
to open the Start-up menu.
5. Select the menu item "Assign" in the Start-up
menu of the home station.
6. Select the menu item "Switching action" in
the "Assign" menu.
7. Select the desired switching action (1-10) and
confirm it with OK.
A long acknowledgement tone indicates
successful assignment.
8. Briefly press the "Systemprogr." button on
the control device to exit the programming
mode.
41
Advertisement
Table of Contents
