CM-080GE/CM-080GE-RA / CB-080GE/CB-080GE-RA
10.2.6 Delayed Readout Mode (Pre-Select)
This mode can be used to delay the transmission of a captured image. When several cameras
are triggered simultaneously and connected to the same GigE interface, it allows the cameras
to be read out in sequence, preventing congestion.
The image data is not transmitted directly by the trigger 0 and it is stored in the memory
located at Ethernet Interface. By the falling edge of the soft trigger 1, the image data is
output.
Trigger 0
CCD Photodiode
CCD Transfer gate
GigE memery
Trigger 1
Ethernet output
Trigger settings;
Exposure
CCD output
Store in the
GigE memory
- 49 -
Output from
GigE