Table of Contents
Advertisement
Drawing an image from source data
Starting the drawing operation
• If the temperature of the head has not reached the predetermined value, a message is displayed.
Drawing is not allowed in such cases. When the display is disappeared, drawing can be started.
• Data transmission is allowed even if errors are displayed. Drawing is started after the display is
disappeared.
1
Set the media. (
(1) When you set the vacuum fan setting (
on the use and vacuum the media.
2
Press the
• The machine goes in the remote mode and data from the
computer can be received.
• The table height is displayed.
3
Transmit data to be drawn from the computer.
• Drawing conditions are displayed.
• As for the data transmission method, see the instruction manual
of the output software.
4
Start drawing.
• The drawing origin is not changed after completion of the drawing.
5
Taking out the media after completion of drawing.
(1) When you made vacuum ON, Press the
(2) Remove the media.
• During printing, media may be heated by the LED UV and raised, causing drawing to be interrupted. In
this case, set new media and restart drawing.
P.2-4)
key in the local mode.
REMOTE
• This machine does not have "H" (double speed)
and "B" (bi-directional).
P.3-19) to "MANUAL", press the
* R E M O T E *
* R E M O T E *
H O S T / 1 6 / U / N
Priority is set to "HOST" :
"HOST" is displayed.
Priority is set to "PLOT" :
Print quality (STD/FINE/FAST) is
displayed.
key to turn the adsorption OFF.
VACUUM
key depending
VACUUM
4 9 . 0 mm
Resolution
With/ without nozzle
recovery setting
7 2 0 X 6 0 0
R
4 9 . 0 mm
Table height
Scanning speed:
"N" denotes normal.
"H" denotes the
double speed.
Direction:
"B" denotes bi-directional.
"U" denotes uni-directional.
Pass
2-9
2
Advertisement
Table of Contents
