Perform Setting To Reduce Stripes Between Passes; Perform Setting To Reduce Stripes Be- Tween Passes - MIMAKI UJF-3042FX Operation Manual

Perform setting to reduce stripes between passes

What is the MAPS Function?
If performing media correction does not resolve feeding stripes, use the MAPS (Mimaki Advanced PassSystem)
function to disperse the pass boundary to make the feeding stripes less visible.
With the UJF-3042, you can use the MAPS2 function
• Enabling the MAPS function, slight color change may be found compared to when the MAPS function
disable. Use it after checking effect in advance.
• MAPS may not be effective depending on image to be printed. Use it after checking effect in advance.
Setting MAPS2 Function
1
Press the
2
Press the
3
Press
4
Press the
5
Press
• Set Value：MAPS2, OFF
6
Press the
• If you selected OFF in step 5, back to step 3.
7
Press
• AUTO
• MANUAL : You can adjust the set value.
• If feeding stripes and color change is not improved by "AUTO" setting, please adjust the
*1.This helps reduce feeding stripes and uneven color.
3-8
key in LOCAL.
FUNCTION
key.
ENTER
to select [MAPS].
key.
ENTER
to select MAPS2.
key.
ENTER
to select "AUTO" or "MANUAL".
: Set the print pattern and smoothing level to the
recommended value automatically depending on
printing mode.
print pattern and smoothing level by "MANUAL" setting.
*1
. (Supported from the firmware ver.4.10)
F UNC T I ON
S E TUP < EN T >
S E TUP
F E ED COMP . < EN T >
S E TUP
MA PS < EN T >
MA PS
MA PS : OF F
MA PS
MA PS : MAP S 2
MA PS 2
MA PS 2 : MANUA L
MA PS 2
MA PS 2 : AU TO