ASSEMBLING THE MOWER
Delivery Checklist
Handlebar
Grassbag Assembly
2
1
Grassbag Attachment
1.12
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Grassbag Frame 2. Grassbag Fabric 3. Supply Cable
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Unfold the handlebar to the operating position. Tighten all
handlebar knobs to secure the handlebar in position.
Take care to ensure that the power cable does not become snagged at
the pivot points.
(1) Insert metal frame into grassbag fabric and (2) Clip into position.
Raise the rear deflector, lower the grassbag through the handlebars and
hook in position. Lower the deflector to rest on the grassbag.