Assembling The Mower For The First Time. 1.12 - Hayter HARRIER 56 Owner's Handbook Manual

1.12
ASSEMBLING THE MOWER FOR THE FIRST TIME
Check that parts are delivered correctly: Remove the
mower from the packaging and check that all loose items
have been supplied correctly. Refer to the delivery checklist
opposite and the general assembly. If any items are missing,
contact your local Hayter Dealer.
Assemble the handlebar: Unscrew the knobs securing the
handlebar sufficiently to allow it to be pivoted. Move the
blade stop lever away from the engine to avoid damage and
unfold the handlebar to its operating position. Tighten the
two knobs to secure the handlebar. Ensure that the knobs are
assembled to the outside of the handlebars.
IMPORTANT - PREVENT DAMAGE : When unfolding
the handlebar, take care to ensure that the controls and
cables do not become damaged. Always replace damaged
controls and cables before using the mower.
Assemble the grassbag: Identify the grassbag and remove
the long ribbon label ( when fitted ) by cutting it off close to
the grassbag. Discard the ribbon label.
WARNING - AVOID ENTANGLEMENT : Completely
remove this ribbon before using the mower
Raise the rear deflector and hook the grassbag over the raised
lip at the rear of the mower deck. Lower the grassbag to rest
against the rear of the mower. Finally lower the rear deflec-
tor to rest against the top of the grassbag.
ASSEMBLY INSTRUCTIONS
DELIVERY CHECKLIST
Description Quantity
Grassbag
Owner's Handbook
Warranty Registration
Card
CS009
H A
Y T E R
H A Y T E R
CS105
343046BD310100
1.12
1
1
1