Related Manuals for Hayter Motif 48 Autodrive
Summary of Contents for Hayter Motif 48 Autodrive
- Page 1 Motif 48 Autodrive Code 439 Original Version (EN) From Serial Number: 314000001 onwards Issued: 21.01.14 Part number: 3383-440 Rev A...
-
Page 2: Table Of Contents
CONTENTS Heavy Growth Introduction Non Grassed Areas Maintenance Schedule Main Features / Specifi cations Engine Detail Safety Precautions 5 - 6 Mower Maintenance 11 - 13 Training Carburettor Adjustments Preparation Oil Service Safety Symbols Air Cleaner Service Operation 5 - 6 Spark Plug Service Maintenance &... -
Page 3: Introduction
The safety precautions listed in this handbook and all other generally recognised regulations on safety must be observed at all times. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk... -
Page 4: Main Features / Specifi Cations
MAIN FEATURES SPECIFICATIONS Code Weight 32.7 Kg Length 1415 mm Width 530 mm Height 1030 mm Width of Cut 480 mm Height of Cut (8 positions) 25 - 55 mm Cutterblade Speed 2800 rpm Engine Briggs & Stratton Engine Type Series 600EX Fuel Type Unleaded petrol... -
Page 5: Safety Precautions
This safety alert symbol indicates important safety While mowing, always wear substantial footwear and long be replaced immediately with a genuine Hayter replacement messages. When you see this symbol be alert to the trousers. Do not operate the equipment when barefoot or part. -
Page 6: Maintenance & Storage
Never pick up, carry the machine or lift the rear defl ector while the engine is running. Always replace worn or faulty parts with genuine Hayter parts. Frequently check fuel lines and fi ttings for cracks or leaks and replace if necessary. -
Page 7: Assembling The Mower Before First Use
(Refer fi g.3) Fuel Type following items have been supplied correctly. If any items are missing, contact your local Hayter dealer. Always use clean, fresh unleaded petrol. Purchase fuel in Prevent Engine Damage quantities that can be used within 30 days. Never mix oil with petrol. -
Page 8: Operating The Mower
OPERATING THE MOWER To prevent accidents do not raise the front of the mower Controls The engine stop lever must be held fi rmly against the handlebar to start and keep the engine running. If the engine stop lever is excessively when making a turn. -
Page 9: Height Of Cut
OPERATING THE MOWER Collection Without Grassbag Height Of Cut Remove the grassbag and operate the mower with the rear To adjust the height of cut: defl ector in the closed position. Hold the lever and pull sideways to disengage it from the (Refer fi... -
Page 10: Maintenance Schedule
MAINTENANCE SCHEDULE Maintenance Schedule • Lubricate wheels, pivot points and linkages. Grease the inner control cables at point of entry and exit from their Follow the hourly or calendar intervals, whichever occurs outer casing. fi rst. More frequent service will be required if working for •... -
Page 11: Mower Maintenance
We (Refer fi g.19) (Refer fi g.20) recommended that this service be carried out by an authorised Hayter Service dealer. 1. Drain fuel by running the engine until the fuel tank is Spark Plug Service empty. -
Page 12: Deck Housing
Unscrew the locknuts and screw the adjuster in or out as injury should the tool slip. ALWAYS use genuine Hayter necessary. Tighten the locknuts when correctly adjusted. replacement parts. -
Page 13: Cutterblade Sharpening
MOWER MAINTENANCE with the engine. clean. Cutterblade Sharpening (Refer fi g.33) A slightly worn cutterblade may be resharpened. Both blade • Lubricate the mower and treat metal parts with a water edges must be sharpened equally to ensure balance. Sharpen Engines stored in excess of 30 days need to be protected with repellent anti-corrosion product. -
Page 14: Lawn Care Calendar
LAWN CARE CALENDAR To be used as a guide only January August There is very little work to do this month apart from brushing away leaves. Keep off the grass if Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a frozen or waterlogged. -
Page 15: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE ACTION PROBLEM CAUSES CORRECTIVE ACTION Engine will not turn Uneven cut Undulating ground conditions Change direction of travel Engine stop lever released Operate engine stop lever over Cutterblade worn Sharpen cutterblade Incorrect oil level Check oil level Cutterblade out of balance Balance the cutterblade Obstruction under deck... -
Page 16: Warranty
Hayter Authorised Service Dealer for clarifi cation. This warranty does not apply to any unit that has been tampered with, altered, misused, abused or used for hire, and will become invalid if non genuine Hayter parts are fi tted. This warranty does not cover for minor mechanical adjustments unless they are due to defective material or workmanship. -
Page 17: Eu Privacy Statement
Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the United States where privacy law may not provide the same protection as applies in your country. - Page 18 NOTES NOTES...
- Page 19 NOTES NOTES...
-
Page 20: Service Records & Customer Information
2nd Year (24 Months) We certify that this service has We certify that this service has been carried out by an been carried out by an Authorised Hayter Service Dealer Authorised Hayter Service Dealer Date:____________________ Date:____________________ Date of Sale:- Engine Type:-...