Switching On The Machine And Preparing It For Use; Pre-Warming Your Cups; Adjusting The Basic Settings; Operating The Machine With Or Without The Lter - Nivona CafeRomatica 830 Operating Instructions And Useful Tips

2. Set up
Please note: If no red dot appears, set water hardness to level 1.
Set the water hardness level on your machine as follows:
! Turn the Rotary control knob to select the appropriate water hard-
ness level.
! Press the Rotary control knob to con rm your selection.
The message, "Please rinse", will now appear on the display screen.
! Press the Rotary control knob.
The system will now be lled with water.
The message, "NIVONA", will now appear on the display screen.
When the machine has heated up, the main menu will appear on the
display screen to indicate that the machine is ready for use.
The rst time you brew a coffee: The rst time you brew a coffee, the
grinder is still empty. So after the rst grinding, the display screen
may show the message, "Fill up beans", and the machine may not
brew any coffee.
! Follow the message on the display screen and simply press the
Rotary control knob again.
The process will then be repeated.

2.5 Switching on the machine and preparing it for use

After you have set up the machine (see 2.4), always switch it on and
prepare it for use as follows:
! Switch on the machine at the mains (Image 1/H).
! Press the on/off button (Image 1/I).
The message, "Heating" will now appear on the display screen.
Once the machine has heated up, the message, "Please rinse", will
appear on the display screen.
! Press the Rotary control knob.
The system will now be rinsed. Then it will be ready for use, and the
main menu will appear on the display screen (Image 1/A).
Please note: If you are not going to use the machine for a signi cant
period of time (e.g., if you are going on holiday), switch off the machine
at the mains (Image 1/H) and remove the plug from the mains.
68

2.6 Pre-warming your cups

850 model only: Your machine is equipped with a high-quality active
cup-warming function that can be switched on and off while the
machine is on.
! By pressing the button (Image 1/K) you can turn on the cup-warm-
ing function. (The mains switch (Image 1/H) must be on.)
The display screen will show the message, "Cup heater on".
! By pressing the button again (Image 1/K) you can turn the cup-
warming function off again.
The display screen will show the message, "Cup heater off".
Tip: Use the warming function to optimise the temperature and aroma of
your coffee to suit your personal preference.

3. Adjusting the basic settings

Please note: There is a factory setting for every speciality coffee. So you
can brew coffee straight away (see 4). But we would advise you to start
by changing the basic settings to match your own preferences. So please
adjust the following basic settings (3.1 to 3.8).

3.1. Operating the machine with or without the lter

3.1.1 Operating the machine with the lter
A Claris lter is one of the accessories that come with the machine.
If you use this lter properly, you will have to descale your machine
less often, as the lter softens the water. The machine's default fac-
tory setting is "Insert lter? No".
! Turn the Rotary control knob to the tool symbol, „settings". Press
the Rotary control knob.
&'()*''+
! Turn the Rotary control knob to "Filter". Press the Rotary control
!"#$%
knob.
! Turn the Rotary control knob to "Insert lter? Yes", so that the
machine knows that the lter is being inserted.
! Press the Rotary control knob. The message, "Insert lter", will
appear on the display screen.
2. Set up / 3. Adjusting the basic settings
69