Subscribe to Our Youtube Channel
Related Manuals for Nivona caferomatica 730
Summary of Contents for Nivona caferomatica 730
- Page 1 730/750 CafeRomatica Fully automatic coffee centre Operating Instructions and Useful Tips Neue Lust auf Kaffee. Downloaded from CoffeeMachineManual.com Manuals...
- Page 2 Operating Instructions and Useful Tips Dear Customer, Congratulations and many thanks for choosing a high-quality NIVONA product. To get the most out of your NIVONA machine, please read this manual carefully before use. Please start by reading the safety notes.
- Page 3 Equipment Text display screen Cup-warming function Rotating rollers, under- with control keys (On / Off switch, neath, at the back of NICR770 only) NICR750 / 770 only Removable water reservoir Nameplate with Steam / hot water model name jet and ‘spumatore’ Cupwarming / (milk frother) holding plate...
- Page 4 Equipment Control knob Air inlet valve Air inlet pipe Inlet valve Steam / hot water jet Liquid inlet hose Downloaded from CoffeeMachineManual.com Manuals...
-
Page 5: Table Of Contents
Contents 1. Safety instructions 2. Set up 2.1 Preparing the machine 2.2 Getting started 2.3 Grinder settings 2.4 Cup-warming function 3. Making coffee 3.1 Selecting coffee strength 3.2 Selecting water quantity 3.3 Making one cup 3.4 Making two cups 3.5 Using pre-ground coffee 3.6 Drawing hot water 3.7 Drawing steam 3.8 Frothing up milk... - Page 6 Afterwards send the • Always unplug the machine during machine to the dealer from whom it extended periods of absence. was purchased – or to NIVONA natio- • Do not leave the machine switched nal customer services. on unnecessarily.
-
Page 7: Safety Instructions
... 1. Safety instructions or a similarly qualified specialist, in • Only touch the plastic parts of the order to avoid any hazards. steam jet (fig. 1/T) and never point it at people. Caution: Electrical appliances must be repaired by qualified personnel. •... -
Page 8: Set Up
... 2. Set up ➔ After the machine has warmed up, 2.2 Getting started the service button (fig. 1/I) flashes. ➔ Remove the plug from the power The instruction “BITTE SPÜLEN” cord compartment (fig. 1/V) and plug (“PLEASE RINSE”) flashes in the the machine in. -
Page 9: Cup-Warming Function
(NICR770: 5 levels). They are shown hardness settings. in the display screen as follows: Tip: The NIVONA fully automatic cof- “VERY MILD”* = less than 7 g of fee centre NICR770 is equipped with ground coffee , e.g. for very mild Latte a personal “My Coffee”... -
Page 10: Making Coffee
... 3. Making coffee 3.2 Selecting water quantity The brewing operation can be cancel- led at any point by pressing the 1-cup You can freely select the quantity of (fig. 1/F) or 2-cup button (fig. 1/G). water used by turning the water quantity control knob (fig. -
Page 11: Using Pre-Ground Coffee
... 3. Making coffee ➔ Press the 2-cup button (fig. 1/G). chamber, and use only fresh or vacuum- ➔ The machine now starts the grind - packed coffee ground from beans. Do ing and brewing operation and pro - not add instant coffee powder! duces two consecutive cups of coffee. - Page 12 ... 3. Making coffee Note: Steam can be drawn for about that it points to symbol ‘hot milk / 2 minutes. Then the machine will cafè latte’. ➔ Now turn the steam / hot water automatically switch the operation off. You can prolong the operation by turn- valve control knob (fig.
- Page 13 4. Programming functions ➔ Afterwards please press the exit The function keys under the text dis - play screen are used to program key. You can now either continue in funct ions (fig. 1/A and 4): programming mode to change other = Programming mode function settings or press exit again to >...
-
Page 14: Programming Functions
... 4. Programming functions reservoir using the assembly tool on must be re placed anyway after no the end of the measuring spoon. longer than two months (see chapter 5.2 “Washing filter manually”). ➔ Fill up the reservoir with fresh water and put it back in the machine. -
Page 15: Temperature
... 4. Programming functions First, test your water with the test “MAXIMUM” as desired. The default strips provided: setting is “HIGH”: ➔ Dip the strip into the water and then ➔ Press the program key P to enter shake it lightly off. programming mode. -
Page 16: Language
... 4. Programming functions 4.6 Language programming mode to change other function settings or press exit to You can set 14 different languages: leave programming mode. German, English, French, Italian, Dutch, Polish, Russian, Estonian, 4.8 Rinsing setting Czech, Swedish, Danish, Lithuanian, Hungarian and Turkish. -
Page 17: Eco Mode
... 4. Programming functions ➔ Press the > key until “PROGRAM remains on power-saving ECO Mode with minimal heat output 3 minutes ECO-MODE” appears. ➔ Press the ok key. The display reads after its last use – therefore using less electricity. - Page 18 ... 5. Maintenance and Care ➔ Fill the tank with fresh water and Caution: Once running, the clean ing replace it in the machine. program must not be inter rupted. ➔ Press the program key P to enter Only add cleaning tablet when the programming mode.
- Page 19 ... 5. Maintenance and Care ➔ Press the program key P to enter WATER / DESCALER IN TANK”. Fill programming mode. tank with water up to the 0.5 l mark ➔ Press the > key until “SELECT before adding the descaling agent. CLEANING”...
- Page 20 ... 5. Maintenance and Care ➔ As soon “TURN VALVE” appears in ➔ Wash the case inside and out with the display, you can turn the valve a soft, damp cloth only. ➔ Empty the drip tray (fig. 1/Z) and control knob (fig.
- Page 21 ... 5. Maintenance and Care lever switch and turning the handle to rear rollers (see image 1/S). This allows the right until it clicks. it to be moved easily on a level ➔ Replace the cover and screw the worktop. This enables you to clean screws back in.
-
Page 22: System Messages
... 6. System messages ➔ Meaning ➔ What to do Message ➔ Drip tray (fig. 1/Z) ➔ Position water and TRAYS MISSING and used coffee tray used coffee trays (fig. 1/U) are absent correctly or not correctly positioned ➔ Contacts on back of ➔... -
Page 23: Troubleshooting
7. Troubleshooting ➔ Meaning ➔ What to do Fault ➔ Jet (fig. 1/T) is ➔ Clean jet thoroughly No hot water / steam comes out blocked ➔ The system may have ➔ Please use a large of jet a build-up of limescale dose of descaler (see 5.4) ➔... - Page 24 NIVONA machine less often. MilkCooler NICT 500: Standard accessory for the NICR770, optional for all NIVONA fully automatic coffee Cleaning tablets centres with milk NIRT 700 frothing devices: The Your fully auto matic coffee centre...
-
Page 25: Further Instructions
- tailer. Customer service NIVONA products are designed to meet the highest quality standards. However, if questions do arise while you operate your machine, we would like to hear from you. Your support is... - Page 26 Notices Downloaded from CoffeeMachineManual.com Manuals...
Need help?
Do you have a question about the caferomatica 730 and is the answer not in the manual?
Questions and answers