System Messages; Troubleshooting - Nivona CafeRomatica 830 Operating Instructions And Useful Tips

Table of Contents

Advertisement

6. System messages

6. System messages
Message
Meaning
FILL-UP PIPE-SYSTEM
Fill or rinse out water hoses
(inside)
Fresh water lter in use may
be faulty
FILL UP WATER
Water reservoir is empty
Water reservoir is absent or
incorrectly positioned
FILL UP BEANS
Not enough coffee beans
Coffee beans do not fall into
grinder (stuck)
Note: The message "FILL UP BEANS" only disappears when coffee has been brewed after
re lling!
EMPTY TRAYS
Drip tray and / or used coffee
tray are full
Contacts on back of drip tray
are not clean and / or dry
TRAYS MISSING
Drip tray and used coffee tray
used are absent or not correctly
positioned
Contacts on back of drip tray
are not clean and / or dry
PLEASE CLEAN
Cleaning programme is needed
PLEASE DESCALE
Descaling programme is
needed
REPLACE FILTER
Filter is no longer ef cient
BREWING UNIT REMOVED
Brewing unit is incorrectly
positioned / inserted
108
What to do
! Press Rotary control knob
! remove or change the lter
cartridge
! Add fresh water
! Correctly position water
reservoir (see point 2.3)
! Add beans to the container
(see point 2.3)
! Stir beans, e.g. with a
spoon, to loosen
! Empty drip and / or used
coffee tray
! Clean / dry contacts
! Position drip and coffee
trays correctly
! Clean / dry contacts
! Clean machine
(see point 5.4)
! Descale the machine
(see point 5.5)
! Replace lter
(see point 5.8)
! Check and insert/lock brew-
ing unit correctly
(see point 5.7)

7. Troubleshooting

Fault
Meaning
No hot water / steam comes
Milk frother (Image 1/R) is
out of jet
blocked
Too little milk foam or foam
The system may have a build-
too liquid
up of limescale
Unsuitable milk
Milk frother is blocked
Coffee only comes out in drips
The system may have a build-
up of limescale
Grinder setting is to ne
Pre-ground coffee is too
ne
Coffee without 'crema'
The system may have a build-
up of limescale
Unsuitable coffee type
Grinder makes loud noise
Beans no longer fresh
Grinder settings not adjusted
to coffee beans
Other substances in grinder,
e.g. little stones
If you are unable to correct a fault / system message yourself, call the national service hotline
– please consult the notes in the accompanying guarantee and customer service
information booklet.
Caution: If the display reads „Error / Service-Tel.", note the code. Switch off and unplug the
machine. Call the national service hotline.
7. Troubleshooting
What to do
! Disassemble and clean milk
frother thoroughly
(Image 1/R)
! Please use a large dose of
descaler (see point 5.5)
! Use cold milk
! Disassemble and clean milk
frother thoroughly
(Image 1/R)
! Please use a large dose of
descaler (see point 5.5)
! Select coarser grinder
setting
! Use coarser pre-ground
coffee
! Please use a large dose of
descaler (see point 5.5)
! Change coffee type
! Use fresh beans
! Optimise grinder settings
! Call service hotline, mean-
while pre-ground coffee can
be used
109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Caferomatica 850

Table of Contents