Brewing A Caffè Lungo - Nivona CafeRomatica 830 Operating Instructions And Useful Tips

4. Brewing speciality coffees
select your setting.
! You can apply your settings by pressing the exit button or by mak-
ing no further changes.
Please note: Do not forget whether you are brewing one or two cups, and
put the cup(s) under the spout as required (Image 6).
! Press the Rotary control knob to start brewing your coffee.
Please note: If you start brewing your coffee inadvertently or too early, you
can actually change some parameters while the coffee is being brewed.
The parameter that you can change will ash in the bottom line of the
display screen.
! While the symbol is ashing, turn the Rotary control knob to select
your setting.
After the bean symbol for aroma, the "ml" display for amount will
ash in the middle of the bottom line, so you can change these pa-
rameters at any time.
! If you wish to abort a brewing process, press the exit button (Image
1/D).
4.3 Brewing a Caffè Lungo
The standard factory setting for Caffè Lungo is: aroma "normal",
volume per cup 180ml, 1 cup.
&'()*''+
The display screen shows: the 3-bean symbol, "180 ml", the 1xcup
&'()*''+
!/#$% !-
symbol.
!"#$%
You can brew your Caffè Lungo in two different ways:
1. You can either use the standard settings from the "Coffee recipes"
menu. These are the factory settings which you can nevertheless
change individually to suit your own taste, as described below.
2. Or you can change the setting according to your taste for each indi-
vidual drink brewed. This does not alter the standard settings.
4.3.1 Brewing a Caffè Lungo using the standard setting
! Place a cup under the spout (Image 5).
! Turn the Rotary control knob to the Caffè Lungo symbol. Press the
Rotary control knob.
&'()*''+
!"#$%
84
The cup illumination will now come on, and the machine will brew a
cup of Caffè Lungo according to the standard setting.
You can change the standard setting as follows:
! Turn the Rotary control knob to the tool symbol, „settings". Press
the Rotary control knob.
&'()*''+
! Turn the Rotary control knob to "Coffee recipes". Press the Rotary
!"#$%
control knob.
! Turn the Rotary control knob to "Caffè Lungo". Press the Rotary
control knob.
The possible settings for aroma, amount and temperature (if the
setting in the temperature menu is "individually" – see 3.3) will now
appear on the display screen.
! Selecting aroma
! Turn the Rotary control knob to "Flavour". Press the Rotary control
knob.
! Turn the Rotary control knob to the aroma of your choice (ranging
from very mild to very strong). Press the Rotary control knob to
con rm your selection.
! From here, you can either continue and program the other settings,
or leave the settings by pressing the exit button.
! Selecting amount
! Turn the Rotary control knob to "Amount total". Press the Rotary
control knob.
! Turn the Rotary control knob to the amount of your choice (from
20 ml to 240 ml). Press the Rotary control knob to con rm your
selection.
Please note: You must take into account the size of your cups.
! From here, you can either continue and program the other settings,
or leave the settings by pressing the exit button.
! Selecting temperature
! Turn the Rotary control knob to "Temperature". Press the Rotary
control knob.
! Turn the Rotary control knob to the temperature of your choice
4. Brewing speciality coffees
85