Setting The Language; Setting The Switch-Off Rinsing Function - Nivona CafeRomatica 830 Operating Instructions And Useful Tips

3. Adjusting the basic settings
! From here, you can either continue and program the other time
settings, or leave the settings by pressing the exit button.
3.4.3 Setting the automatic switch-off time
Using this function, you can set how long the machine will stay on
after its last use before automatically switching into stand-by mode.
The basic factory setting is "after 0.5 hours".
! Turn the Rotary control knob to the tool symbol, „settings". Press
the Rotary control knob.
! Turn the Rotary control knob to "Times". Press the Rotary control
knob.
! Turn the Rotary control knob to "Unit auto OFF in". Press the
Rotary control knob.
The possible switch-off times (ranging from 0.5 to 12 hours) will now
appear on the display screen.
! Turn the Rotary control knob to select your desired switch-off
time.
! Press the Rotary control knob to con rm your selection.
The other time settings will now appear on the display screen, and
your machine will automatically switch into stand-by mode once the
selected switch-off time has elapsed after its last use.
! From here, you can either continue and program the other time
settings, or leave the settings by pressing the exit button.
3.4.4 Setting the automatic cup-warming function
850 model only: Using this function, you can select to switch on the
cup-warming function automatically when the machine is switched
on. If both the automatic switch-on function for the machine and
the "Cup heater auto ON" function are activated, the cup-warming
function will be automatically switched on 20 minutes before the
machine switch-on time.
! Turn the Rotary control knob to the tool symbol, „settings". Press
the Rotary control knob.
&'()*''+
! Turn the Rotary control knob to "Times". Press the Rotary control
!"#$%
knob.
! Turn the Rotary control knob to "Cup heater auto ON". Press the
Rotary control knob.
74
! Turn the Rotary control knob to "Disabled" or to "Enabled".
! Press the Rotary control knob to con rm your selection.
The other time settings will now appear on the display screen.
! From here, you can either continue and program the other time
settings, or leave the settings by pressing the exit button.
3.4.5 Setting the time format
Using this function, you can select whether the clock time will be
shown in 12-hour or 24-hour mode. The basic factory setting is
24-hour mode.
! Turn the Rotary control knob to the tool symbol, „settings". Press
the Rotary control knob.
&'()*''+
! Turn the Rotary control knob to "Times". Press the Rotary control
!"#$%
knob.
! Turn the Rotary control knob to "24 hours" or "am/pm".
! Press the Rotary control knob to con rm your selection.
The other time settings will now appear on the display screen.
! From here, you can either continue and program the other time
settings, or leave the settings by pressing the exit button.

3.5. Setting the language

! Turn the Rotary control knob to the tool symbol, „settings". Press
the Rotary control knob.
&'()*''+
! Turn the Rotary control knob to "Language". Press the Rotary
!"#$%
control knob.
! Turn the Rotary control knob to select your language.
! Press the Rotary control knob to con rm your selection.
The other settings will now appear on the display screen.
! From here, you can either continue and program the other set-
tings, or leave the settings by pressing the exit button.

3.6. Setting the switch-off rinsing function

The switch-on rinsing function is pre-programmed and installed
by the manufacturer. Each time it is switched on when cold, the
3. Adjusting the basic settings
75