Table of Contents
Advertisement
2. Set up
2.1 Preparing the machine
Carefully remove the machine and
all parts from the packaging.
Note:
If you need to return your
machine for servicing, it can be
sent by post in the original packag-
ing. Please keep all packag ing and
protective material for this purpose.
Remove the water reservoir
(fig. 1/B and 2) and wash it out
with cold, fresh tap water.
Then fill the reservoir up to the
"max." mark and replace it in the
machine. Make sure that it clicks
into place.
Note:
Only fill the reservoir with
fresh, cold water. Do not use car-
bonated water or other liquids.
Open the lid of the coffee con-
tainer (fig. 1/N) and add coffee
beans.
Note:
Do not use beans which have
been treated with supplements,
such as sugar, during or after the
roasting. Supplements can damage
the grinding mechanism and any
repair costs arising as a result are
not covered by the guarantee.
Please make sure the steam / hot
water valve control knob (fig. 1/Q
and 7) is turned to '0'!
8
Downloaded from CoffeeMachineManual.com Manuals
2.2 Getting started
Remove the plug from the
power cord compartment (fig. 1/V)
and plug the machine in.
Switch the mains supply on
(fig. 1/S). The On / Off button
(fig. 1/F) lights up.
Press the On / Off button
(fig. 1/F). „SYSTEM HEIZT"
("SYS. IS HEATING") appears in
the display.
After the machine has warmed
up, the service button (fig. 1/I)
flashes. The instruction „BITTE
SPÜLEN" ("PLEASE RINSE")
flashes in the display.
Now place a cup under the
height-adjustable coffee spout
(fig. 1/J and 5) and press the ser-
vice button (fig. 1/I). The system
is then filled with water and com-
pletely rinsed out via the coffee
spout (fig. 1/J and 5).
The machine is now operational.
Note:
Please see point 4.5 to
change language!
Note:
For manufacturing reasons,
the machine hoses may still be
empty when the machine is first
operated. The machine indicates
this as follows:
After the machine has been
switched on using the On / Off but-
Hide quick links:
Advertisement
Table of Contents
