Quick Connect - Aztech WL590E User Manual

Quick Connect

The default page of the Web User Interface. The Quick Connect menu allows
you to scan for the available wireless networks within range and connect to
your preferred wireless network as well.
To connect to a Wireless Network, simply do the following:
1. Click the Quick Connect menu icon and wait for the search
initialization to finish.
2. Determine your preferred wireless network, then click its corresponding
Connect
page of your WL590E as seen below:
NOTE: You can change the properties of both the 2.4GHz and 5.0GHz
bands.
3. Input the Wireless network's passphrase on the WPA Passphrase
(Wireless Password) text box then click Apply. Kindly wait for the
repeater to finish initializing the connection. Your repeater would
reboot upon successful connection.
NOTE: To know if you have successfully connected to your device,
check the LEDs of your WL590E; it would be in STABLE GREEN light.
button. You will then be redirected to the Wireless Setup
User Manual
Page 17 of 40