Aztech WL593USB Easy Start Manual

Device Overview
WPS Button
1
STEP
The following items are included in your WL593USB
package.
•
•
•
Note: The Easy Start Guide, the Utility Driver and the
Easy Start Guide
User Manual is included in the Resource CD and is also
WL593USB | 900Mbps Wireless AC
downloadable on our Aztech Support Website (http://www.
Dual Frequency USB 3.0 Adapter
aztech.com/support/).
2
STEP
Remove or Disable Conflicts
To make sure that the device installation will run
smoothly, you need to remove or disable conflicts that
may interfere with the installation. Probable conflicts
may include:
• Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software and firewall
Check Package Contents
applications may interfere with the installation.
These should be removed or disabled before
starting the installation.
WL593USB • USB Cable
• Configuring Internet Properties
Easy Start Guide Resource CD
•
Warranty Card A. Click the Start button, and then click Run. This
opens the Run dialog box.
B. Type 'control inetcpl.cpl' and then click OK. This
opens the Internet Properties window.
C. Click Connections tab. D. In the Temporary Internet Files pane, click Delete
D. In Dial-up and Virtual Private Network settings, Cookies.
check 'Never dial a connection'. E. Click Delete Files.
Click OK to close the Internet Properties. F. To close Internet Properties, click OK.
E.
• Removing Temporary Internet Files 3
STEP
Temporary Internet files are files from Web sites
Here are the instructions on how to install the Utility
that are stored in your computer. Delete these files
driver for Windows Vista, 7 and 8.
to clean the cache and remove footprints left by the
Note: Do not connect the device until the Utility is
Web pages you visited.
completely installed.
A. Click the Start button and then click Run. This
To install the driver software:
opens the Run dialog box.
Insert the Resource CD to the CD-ROM. This opens
A.
B. Type 'control' and then click OK to open the
the WL593USB Realtek Wireless Utility. If the Utility
Control Panel.
does not open automatically, click the Start button
C. Double-click Internet Options to open the Internet
and then click Run. Enter d:\setup.exe where d is
Options window.
the CD-ROM drive.
Software Installation
B. Follow the step-by-step instructions provided to
complete the Setup Wizard.
NOTE: It is advised to Restart your computer when
prompted by the Setup Wizard.