Aztech WL590E User Manual page 30

User Manual
System Password
The System Password page allows you to set a password on the web user
interface in order to prevent other users from getting access to the web UI
and avoid unwanted changes in your device's current settings.
To change the password, simply type in your preferred password and click on
Apply to activate this feature. To disable the password, simply remove the
password and click apply to save your settings.
NOTE: Upon clicking the Apply button, you would be prompted to login to
the Web User Interface. Simply enter the new password you assigned and the
settings would then be applied.
Note: Forgotten passwords cannot be recovered. Reset the device to its
factory default by pressing the reset button found beside the Ethernet port of
WL590E for 10 seconds.
Page 30 of 40