Setup The Device - Aztech WL590E User Manual

Setup the Device

In setting up your device, kindly follow the instructions provided below. A
diagram has also been provided for additional reference.
1. Plug your WL590E to a power outlet.
2. Connect your WL590E to the computer using an Ethernet cable
through each device's respective Ethernet port.
3. Launch a web browser and you will automatically be redirected to the
Web User Interface of your WL590E. If in any case it does not, kindly
type 10.0.10.254 on the address bar and hit enter.
4. Select your SSID (wireless network/wifi name) from the list and click its
corresponding Connect button
5. Type the password for the wireless network of your router and click
apply. The WL590E will reboot and will redirect to the user interface with
the status dependent on the frequency band of your wireless router:
1
2
.
User Manual
Page 11 of 40