Setup - Aztech WL590E User Manual

User Manual

Setup

The Setup page shows the current properties of the WL590E. This page also
allows you to change the mode of operation, the SSID, the security mode,
enable or disable the broadcast of your SSID, change the passphrase of the
SSID broadcasted by your WL590E, and define the encryption type.
 SSID. Refers to your WL590E's wireless network name.
 MAC Address. The MAC address of your WL590E. The information in this
field cannot be changed.
 Broadcast SSID. Allows you to enable or disable the broadcast of your
wireless. By disabling this, you have to manually connect to your
wireless network.
 Security Mode. Allows you to configure the combination of characters
the wireless password would have.
 WPA Passphrase. Allows you to add the current wireless password of
the Wireless Network. You are only allowed to configure this AFTER you
have successfully connected to a network.
 WPA Encryption. Allows you to change the encryption settings of your
WL590E.
 Channel. Allows you to configure the wireless channel of your WL590E.
Page 18 of 40