The Web User Interface - Aztech WL590E User Manual

The Web User Interface

The Web User Interface of your WL590E allows you to configure the various
features of your WL590E. This will serve as your main tool in monitoring and
configuring all of your WL590E's main features.
Accessing the Web User Interface
NOTE: To avoid any conflicts in accessing the Web User Interface, it is strongly
advised to do the following:
 Simply access the Web User interface through an Ethernet connection.
This is achieved by connecting your Computer and your WL590E
through an Ethernet cable.
 If present, kindly turn off the wireless adapter of your computer. You
may enable the wireless adapter after completing the setup. This is to
avoid IP address conflict which might block you from accessing the
Web user interface.
 Remove temporary Internet files.
To access the Web User Interface through an Ethernet connection:
1. Connect your computer to the WL590E device using an Ethernet cable.
NOTE: Before proceeding to step 2, please check the SMART LED on
the device; the LED should be in GREEN WEAK status and BLINKING.
User Manual
Page 13 of 40