Firmware Upgrade
The Firmware Upgrade page allows you to update the firmware of your
device for future changes and enhancements. However, it is strongly
suggested to only upgrade your device firmware if it was advised by Aztech.
You
may
download
www.aztech.com/support.
Note: It is strongly recommended to only use OFFICIALLY released Aztech
Firmware. This can be downloaded from our Aztech Support Website
(ww.aztech.com/support).
Using any kind of third party firmware will void the warranty of your device.
To upgrade the firmware:
1. From the Device Admin page, click the Firmware Upgrade icon.
2. Click on the Browse button and locate and open the firmware for your
WL590E (single.img).
3. Click Apply to start the update. Wait for the firmware upgrade to finish
and for the device to reboot. You will be redirected to the Homepage
of your WL590E.
the
latest
firmware
User Manual
for
your
device
Page 29 of 40
at