Install Air Duct; Install Side Cover; Finishing Up; Install Software - Intel P4308CP4MHEN Quick Installation User's Manual

General Installation Process
18

Install Air Duct

Note: Please order the air duct that is compatible with your server
board and chassis.
A
Align the air duct and chassis rail.
B
Install the air duct. Ensure that alignment holes and tabs
match-up.
A
20

Finishing Up

®
See your Intel Server
1.
Board Quick Start
User's Guide to connect
your keyboard, mouse,
video, and other I/O cables.
2. Connect the AC
power cable last.
CAUTION:
power supply
requires a
16-gauge
power cord.
Air Duct
alignment tabs
B
Chassis
alignment holes
AC
Power
19

Install Side Cover

A
Slide the chassis cover on the chassis.
B
Secure the chassis cover with the screws .
CAUTION: This chassis must be operated with the
SIDE COVERS installed to ensure proper cooling.
B
B
21

Install Software

• BIOS, Drivers, and Operating System Install
A. Confirm BIOS Version: Look on the Server/System
Management screen in the BIOS Setup Utility to determine the
installed BIOS version. Compare this to the versions at:
http://www.intel.com/support
If new versions are available, update the BIOS on your server.
See the User Guide on the Intel
Management DVD for update instructions.
B. Configure your RAID Controller: Use the instructions
provided with the RAID controller.
C. Install your Operating System: Use the instructions
provided with the RAID controller and with the operating system.
D. Install Operating System Drivers: With the operating
system running, insert the Intel
Management DVD. If using a Microsoft Windows* operating
system, the Express Installer will autorun and allow you to select
the appropriate drivers to install. On other operating systems,
browse the DVD folders to locate and install the driver files.
10
A
Server Deployment and
®
Server Deployment and
®