Timer Feature (Kitchen Timer/Stand Time/Delay Start) - Panasonic NN-CS896S Operating Instructions Manual

This feature allows you to program the oven as a kitchen
timer. It can also be used to program a standing time after
cooking is completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
Step 1. • Touch Timer/Clock once.
Touch once
Step 2. • Set time by touching "+"/"-" or
Swipe
Step 3. • Touch Start.
To Set Stand Time:
Example: To cook at 600 W for 3 minutes with stand
time of 5 minutes.
Step 1. • Touch Micro Power until the
Touch 3 times.
Step 2. • Set cooking time, touching "+"/"-"
Swipe
Step 3.
• Touch Timer/Clock once.
Touch once
Step 4. • Set stand time, touching "+"/"-" or
Swipe
Step 5.
• Touch Start.
F0003BH71CP_OI_Eng_00_160121.indd sec42 F0003BH71CP_OI_Eng_00_160121.indd sec42
Timer Feature
swipe the slider bar to 5 minutes.
Time will count down without
oven operating.
desired power level appears in the
display window.
or swipe the slider bar to
3 minutes.
swipe the slider bar to 5 minutes.
Cooking will start. After cooking,
stand time will count down
without oven operating.
CAUTION:
If oven lamp is lit while using the timer feature, the
oven is incorrectly programed. Stop oven immediately
and re-read instructions.
To Set Delay Start:
Example: To delay the start of cooking for 5 minutes,
and cook at 600 W for 3 minutes.
Step 1. • Touch Timer/Clock once.
Touch once
Step 2. • Set delay time by touching "+"/"-"
or swipe the slider bar to
5 minutes.
Swipe
Step 3. • Touch Micro Power until the
desired power level appears in the
display window.
Touch 3 times
Step 4. • Set cooking time, touching "+"/"-"
or swipe the slider bar to 3 min-
utes.
Swipe
Step 5. • Touch Start.
Delay time will count down. Then
cooking will start.
NOTES:
1. When each stage fi nishes, a two-beep signal sounds. At
the end of the program, the oven will beep fi ve times.
2. If oven door is opened during the Standing Time, Delay
Start or Kitchen Timer, the time in the display window will
continue to count down.
3. This feature is only available for Microwave, Grill (without
preheating), Combination, Timer, Convection (without
preheating), Steam and 300 W + Steam feature.
4. Delay Start/Standing Time cannot be programmed be-
fore/after any Auto program (such as popcorn, inverter
turbo defrost, auto cook and sensor cook feature). This
is to prevent the standing temperature of the food from
rising before defrosting or cooking begins. A change in
the starting temperature could cause inaccurate results
and/or food may deteriorate.
5. When using Standing time or Delay Start, it's up to 2
power stages.
6. The maximum programmable time of Standing Time,
Kitchen Time or Delay Time is up to 90 minutes.
42
2016/1/22 9:14:01 2016/1/22 9:14:01