Control Panel - Panasonic NN-CS896S Operating Instructions Manual

Display Window
Step by step instructions scroll for
easy operation
Sensor Reheat/Cook Pad
Auto Cook Pad (page 31)
Popcorn Pad (page 28)
Steam Pad (page 24-25)
Convection Pad (page 23)
Micro Power Pad (page 21)
Combination Pad (page 26)
Stop/Reset Pad
Before cooking: One touch clears all
your instructions.
During cooking: One touch
temporarily stops the cooking
process. Another touch cancels all
your instructions, and time of day or
colon appears in the Display Window.
Beep Sound:
When a pad is touched correctly, a beep will be heard.
If a pad is touched and no beep is heard, the unit did not or cannot accept the instruction. When operating, the oven will
beep twice between programmed stages. At the end of any complete program, the oven will beep 5 times.
Notes:
1. If there is no operation for 6 minutes after setting cooking program, the oven will automatically cancel the cooking
program. The display will return to clock or colon display.
2. The oven will enter stand-by mode after the last operation has completed. When in stand-by mode, the backlight of the
display will be reduced and the backlight of key will be turned off.
3. When in stand-by mode, it is necessary to open and close the oven door before operating the oven.
4. If no beep sound is heard, check "Beep ON/OFF" function feature (P19, 20).
F0003BH71CP_OI_Eng_00_160121.indd sec15 F0003BH71CP_OI_Eng_00_160121.indd sec15

Control Panel

(page 32)
Slider bar (page 19)
Touch or hold "+"/"-",
swipe the slider bar to select the
cooking options.
Inverter Turbo Defrost Pad
(page 29)
More/Less Pad (page 28)
Quick 30 Pad (page 27)
Grill Pad (page 22)
Timer/Clock Pad
(page 18, 42)
Start Pad
After cooking program setting, one
touch allows oven to begin
functioning.
If door is opened or Stop/Reset Pad
is touched once during oven
operation, Start Pad must be touched
again to restart oven.
15
2016/1/22 9:13:58 2016/1/22 9:13:58