3-Stage Cooking; Quick 30 Feature - Panasonic NN-CS896S Operating Instructions Manual

This feature allows you to program 2-3 Stages of cooking
continuously.
Example: Continually set 600 W for 5 minutes, Grill 2
for 3 minutes and Combination 1 for
5 minutes.
Step 1. • Touch Micro Power until the
Touch 3 times
Step 2. • Set cooking time by touching "+"/
Swipe
Step 3. • Touch Grill until the desired power
Touch twice
Step 4.
• Set cooking time by touching "+"/
Swipe
Step 5. • Touch Combination until the
Touch once
Step 6. • Set cooking time by touching "+"/
Swipe
Step 7. • Touch Start.
NOTES:
1. The maximum number of stages for cooking is 3.
2. When using 1000 W for the fi rst stage, you may skip
step 1.
3. Fill the water tank before using Steam feature.
4. When operating, two beeps will sound between each
stage.
5. This feature is only available for Microwave, Grill (without
preheating), Combination, Timer, Convection (without
preheating), Steam and 300 W + Steam feature.
6. Combination 4-6, Steam and 300 W + Steam feature
can not be used over 30 minutes in this feature.
7. Auto program (such as popcorn, inverter turbo defrost,
auto cook and sensor cook feature) can't be use in

3-stage cooking.

F0003BH71CP_OI_Eng_00_160121.indd sec27 F0003BH71CP_OI_Eng_00_160121.indd sec27
3-Stage
Cooking
desired power level appears in the
display window.
"-" or swipe the slider bar to
5 minutes.
level appears in the display
window.
"-" or swipe the slider bar to
3 minutes.
desired power level appears in the
display window.
"-" or swipe the slider bar to
5 minutes.
Cooking will start. The time in the
display window will count down.
This feature allows you to set or add cooking time in
30 seconds increments up to 5 minutes.
To Set Time using Quick 30:
Example: To cook at 600 W for 1 minute 30 seconds
Step 1. • Enter the desired Micro Power
(see page 21 for directions).
Touch 3 times
Step 2. • Touch Quick 30 until the desired
cooking time (up to 5 minutes)
appears in the display window.
Touch 3 times
Step 3. • Touch Start.
Cooking begins and the time will
count down. At the end of
cooking, 5 beeps sound.
NOTES:
1. When using 1000 W for the fi rst stage, you may skip
step 1.
2. This feature is only available for Microwave, Grill (without
preheating), Combination, Timer, Convection (without
preheating), Steam and 300 W + Steam feature.
3. Auto program (such as popcorn, inverter turbo defrost,
auto cook and sensor cook feature) can't be use in

Quick 30 feature.

4. After setting the time by Quick 30 Pad, you cannot use
Slider bar.
To Add Time using Quick 30:
Example: Add 3 minutes, when using grill feature.
• During manual cooking, touch
Quick 30 until the desired cooking
time (up to 5 minutes) appears in
the display window.
Touch 6 times
NOTES:
1. This feature is only available for Microwave, Grill,
Combination, Timer, Convection, Steam and
300 W + Steam feature.
2. Auto program (such as popcorn, inverter turbo defrost,
auto cook and sensor cook feature) can't be use in
Quick 30 feature.
27
Quick 30
Feature
2016/1/22 9:13:59 2016/1/22 9:13:59