Eco Dect - Siemens GIGASET C595 Manual

ECO DECT

You are helping to protect the environ-
ment with your Gigaset CS590/CS595.
Reduced energy consumption
Your telephone has a power-saving
adapter plug and uses less power.
Reducing radiation
The radiation from your telephone is
reduced automatically:
u
The handset's transmission power is
reduced depending on the distance to
the base.
u
The transmission power on the base is
reduced to virtually zero when only one
handset is registered and the handset is
in the base.
You can reduce the radiation from the
handset and base even more by using
Eco Mode or Eco Mode+:
u
Eco Mode
80% transmission power reduction of
the base in standby and talk mode.
u
Eco Mode+
100% transmission power deactivation
of the base and handset when a call is
not being made or received.
Eco Mode / Eco Mode+ can be activated
and deactivated independently of each
other and also work on multiple handsets.
The handset does not have to be in the
base.
Activating/deactivating the Eco Mode /
Eco Mode+
Ï
¢ ¢
v
Eco Mode
¢
Eco Mode / Eco Mode+
Press the display key
§Change§
(³ = on).
Status displays
Display icon
Signal strength:
Ð i Ñ Ò
– good to poor
|
(flashes) – no signal
Ð
white Eco Mode deactivated
Ð
green Eco Mode enabled
¼
white Eco Mode+ enabled
(displayed instead of the
reception strength icon
when in idle status)
¼
green Eco Mode and Eco
Mode+ activated
Please note
u
With Eco Mode+ enabled, press and
hold the talk key c to check that
the base can be reached. You will
hear the ringtone if the base can be
reached.
u
When Eco Mode+ is enabled:
– call setup will be delayed by
approx. 2 seconds.
– handset standby time will be
reduced by approx. 50%.
u
Registering handsets that do not
support Eco Mode+ will cause the
mode to be deactivated on the base
and all other handsets.
u
Activating Eco Mode reduces the
range of the base.
u
Eco Mode / Eco Mode+ and
repeater support (
cel each other out, i.e. if you use a
repeater you cannot use Eco Mode
and Eco Mode+.
ECO DECT
¢
page 67) can-
55