Operating The Answering Machine Of The Gigaset C595 Base; Operation Via The Handset - Siemens GIGASET C595 Manual

Operating the answering machine of the Gigaset C595 base

Operating the answering
machine of the
Gigaset C595 base
The answering machine is operated via
the handset, the keys on the base
¢
( page 3) or by remote operation (from
another telephone/mobile phone). You
can record your own announcement mes-
sage or advisory message via the handset.
Answering machine mode
You can use the answering machine in
two different modes.
u
In
Answer & record
hears the announcement and can then
leave a message.
u
In mode, the caller hears
Answer only
your announcement but cannot leave a
message.

Operation via the handset

The handset loudspeaker activates auto-
matically if you receive an acoustic
prompt or message while operating the
answering machine. You can switch it off
with the speaker key d.
Activating/deactivating and setting the
answering machine mode
You can choose between
and Alternating. By using the
Answer only
setting you can activate the
Alternating
answer and record mode for a set period,
outside this period the caller will hear the
advisory message.
¢ ¢
Ì
v
Activation
Press the display key.
§Edit§
48
mode, the caller
Answer & record,
(μ= on)
¤
Change multiple line input:
Activation:
Select On or Off to activate/deactivate
the answering machine.
•
Mode:
Answer & record, Answer only
select Alternating.
If the Alternating mode is selected:
Record from:
Enter hours/minutes for the start of the
period in 4-digit format.
(The time must be set on the phone
beforehand.)
Record until:
Enter hours/minutes for the end of the
period in 4-digit format.
Press the display key.
§Save§
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been
set an appropriate announcement is made
¢
(Set time page 15). The
appears in the display. The LED display
lights up on the base (
The phone is supplied with pre-recorded
announcements for answer and record
mode and for advisory only mode. If a
personal announcement has not been
recorded, the relevant pre-recorded
announcement is used.
If the messages memory is full and
has been selected, saving
Activation: On
is interrupted and you will receive an
instruction to delete old messages.
or
Ã
icon
¢
page 3).