Changing The Speaker/Earpiece Volume; Changing Ringtones - Siemens GIGASET C595 Manual

Handset settings
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
handsfree talking and the earpiece vol-
ume to five different levels.
In idle status:
t
Call up the
menu.
r
Set the earpiece volume.
s
Scroll to the
r
Set the speaker volume.
Press the display key if neces-
§Save§
sary to save the setting perma-
nently.
Setting the volume during a call:
t
Press the control key.
r
Select volume.
The setting will automatically be saved
after approximately 3 seconds, if not then
press the display key
If t is assigned to another function:
Open menu.
§Options§
Volume Select and press
Configure setting (see above).
Please note
You can also set the call volume using
¢
the menu ( page 27).
64
Handset Volume
line.
Speaker:
.
§Save§
.
§OK§

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 3 = Š) and the
"crescendo" ringtone (6; volume
increases with each ring = ‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
You can set different ringtones for the fol-
lowing functions:
u
Int. Calls
u
Extern. Calls
Setting volume/melody
In idle status:
Ï
¢ ¢
v
Audio Settings
¢
Ringtones(Handset)
¢
Volume / Melodies
r
Set volume/melody for inter-
nal calls and anniversaries.
s
Scroll to the next line.
r
Set volume/melody for exter-
nal calls.
Press the display key to save
§Save§
the setting.
Switching on/off the ringtone for
anonymous calls
You can set your telephone not to ring if a
caller withholds their number. The call will
only be signalled in the display.
In idle status:
Ï
¢ ¢
v
Audio Settings
¢
Ringtones(Handset)
¢
Anon. Calls Silent
Press to activate/deactivate the
§Change§
function (³= on).