Advertisement
GLASAIR SPORTSMAN G2-2
Balsa stick.
Epoxy.
4) Locate the plywood battery tray to the
fuselage. Tighten the screws using machine
screws M3x15mm to secure the tray in position.
M3x15mm.
Battery.
5) Attach the speed control to the side of the
motor box using two-sided tape and tie wraps.
Connect the appropriate leads from the speed
control to the motor. Make sure the leads will
not interfere with the operation of the motor.
14
.
Electric motor.
spinner cone.
sharp modeling knife and carefully trim away
the spinner cone where the propeller comes
Tie wraps.
in contact with it.
Instruction Manual.
Recomend Mounting Speed Control inside
Fuselage If Flying off Water.
Speed control.
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
The propeller should not touch any part
of the spinner cone. If it does, use a
Advertisement
