Before You Begin - THE WORLD MODELS PIPER J-3 CUB 26s Instruction Manual

PIPER J - 3 CUB 26s

BEFORE YOU BEGIN

PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
BEFORE YOU BEGIN
1
Read through the manual before you begin, so you will have an overall idea of what to do.
2
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement. The
manufacturer will replace any defective parts, but will not extend to the parts that are good before
gluing to defective parts during assembly. Warranty will not cover any parts modified by customer.
3
Symbols used throughout this instruction manual comprise of the following : -
Apply epoxy glue.
Apply thread locker
Assembl
sides the same way.
Pee l off shaded portion
covering film.
Drill holes with the specified
diameter (here:3mm).
3mm
Pay close attention here!
A002SPO24781009
I N D E X
e left and right
Appl y instant glue
(C.A.glue, super glue.)
Ensur e smooth non-binding
movement while assembling.
Cut off shaded portion.
Must be purchased separately !
Pierce the shaded portion
covering film.
Warning!
P.1
P. 1
P. 2
P. 3 -10
P.10
Do not overlook this symbol !