To Operate In Duplex Mode (Repeaters) - Uniden UH820SX-NB Owner's Manual

VOX
PRI
Operation
SCAN

To Operate In Duplex Mode (Repeaters)

The Duplex function enables you to access local repeater stations.
You can only activate Duplex on CH01-CH08 and CH41-CH48.
NOTE
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will
extend the range of your radio and overcome the shielding effect caused by
solid obstructions.
Eg. CH01 is being used in your area
for repeater use.
1. Press (menu) three times.
2. Press (ch)
RX
change the selection. r appears for CH01-CH08
and n appears for CH41-CH48 when duplex
is selected.
3. Press & hold (menu) to save and exit.
Contact your retailer for a list of repeaters available in your area.
NOTE
Operation with the aid of a Repeater
UNIDEN UH820SX-NB/UH820SX-2NB
RX
M
Squelch
M
Selecting a Channel
M
To Transmit and
Receive - 2
M
To Operate In Duplex
Mode (Repeaters) - 1
or or (vol) or
Transmit Power - 1
HI
Transmit Power - 2
HI
Open Scan (OS) Mode
M
SCAN
Group Scan (GS) Mode
RX
to
RX
14
M
Selecting a Channel
M
To Transmit
and Receive - 1
TX
M
To Operate In Duplex
Mode (Repeaters) - 1
To Operate In Duplex
Mode (Repeaters) - 2
Transmit Power - 2
HI
Scanning
M
GS
Group Scan (GS) Mode
GS
Monitor
UHF CB Radio
RX