Uniden UH820SX-NB Owner's Manual page 10

Getting Started
1. Connect the adapter's plug to DC IN 9V jack
of the charging cradle and plug the other end into
an AC outlet.
2. Set the charging cradle on the desk or tabletop, and
place the radio in the charging cradle with the keypad
facing forward.
3. Make sure that the LED illuminates. Charge the battery
pack for 16 hours and remove the radio from the
charging cradle after charging.
• Charge time may vary depending on the battery life remaining.
• For fastest charging, turn off the radio before charging.
NOTE
• The charging cradle is not waterproof. If the charging
cradle falls into water, unplug it before attempting to
remove it from the water. Allow the cradle to dry completely
before reconnecting the power.
WARNING
• Wipe off dirt or shake water from your radio before placing
in the charging cradle if your radio is soiled or wet.
UNIDEN UH820SX-NB/UH820SX-2NB
10
(single charger shown)
UHF CB Radio