Roger Beep; Ctcss (Continuous Tone Coded Squelch System) - Uniden UH6060 Owner's Manual

Operation

Roger Beep

1. Press [MENU] four times.
The roger beep (rb) setting flashes.
2. Press /
setting between ON or OFF.
3. Press the PTT button to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE

CTCSS (Continuous Tone Coded Squelch System)

Press /
Press [DCS/CTCSS].
The CTCSS/DCS code display flashes. The CTCSS or DCS icon also
flashes depending on which code is set.
Press /
select the desired CTCSS code 01 - 50.
Press [DCS/CTCSS] once to store the new
setting.
To turn off CTCSS (or DCS) select the off (oF)
code during setting selection.
UNIDEN UH6060
to change the
to select the desired channel to use CTCSS.
on the Remote SPK/MIC to
CALL
SCAN
22
SQL INST
EMG
MENU
DCS
CTCSS
SQL INST
CALL EMG
MENU
DCS
SCAN
CTCSS
UHF CB Transceiver